Powered by Smartsupp

WOODLAK EXTERIOR – outdoor varnish for wood

An acrylic, waterborne varnish for wood and wood-based products used outside. The varnish is based on modern raw materials that do not contain harmful substances.

Application

WOODLAK EXTERIOR is designed for painting wood products and wood-based materials, in particular:

  • garden furniture
  • wooden garden architecture – gazebos, pergolas
  • furniture
  • decorative shutters, soffits, wooden and wood-based facade cladding

Gallery

Colours

In the basic version, the WOODLAK EXTERIOR is a colorless product. It is also available in colors: pine, green, brown.

Characteristics

  • WOODLAK EXTERIOR creates varnish coatings with very good adhesion to the ground, high hardness and at the same time with high flexibility
  • creates coatings with high weather resistance
  • protects wood against water and UV radiation
  • it is produced in a semi matt version (gloss 33 degrees measured at an angle of 60 degrees) and gloss version (gloss 80-85 degrees)
  • it is adapted to three application methods: varnish for pneumatic spraying method (can also be painted with a brush), hydrodynamic spraying and immersion

Download

WOODLAK EXTERIOR Technical data sheet

See more

Expert advice

Surface preparation:

Surfaces to be painted should be sanded with fine-grained sandpaper and thoroughly dusted off. Wash the resinous areas of wooden substrates with extraction gasoline.

 

Application:

Mix the WOODLAK EXTERIOR before use. Apply the WOODLAK EXTERIOR to the cleaned surface by dipping, brush or, most preferably, by spraying. It is recommended to apply two layers; after the first coat has dried, i.e. about 1 hour, apply the second layer. Lightly sand the coating between layers. EKOAKRYLIK PRIMER sanding primer can be used as the first layer. The primer levels the surface and grinds very well.

Products painted before packaging are preferably seasoned at around 2 days at room temperature.

Clean painting tools with water.

Painting should be carried out at a temperature of at least 10°C, and most preferably at 20° ± 5°C

CONTACT WITH US

Aksil Specialized Varnish Products Factory Ltd.