EKOAKRYLKA MAGNETIC BLACKBOARD 2 in1 PAINT
EKOAKRYLKA MAGNETIC BLACKBOARD 2 in 1 PAINT is a water soluble acrylic paint which converts surface of a wall into a blackboard, on which one can write or draw and attach magnets (it is best to use neodymium magnets). EKOAKRYLKA MAGNETIC BLACKBOARD 2 in 1 PAINT creates extremely durable surfaces of perfect resistance to wear and cleaning. Slight smell and absolutely safe of use are characteristic of the product.Go to shop >
EKOAKRYLKA MAGNETIC BLACKBOARD 2 in 1 PAINT works perfectly in creating surfaces to write with chalk and sticking notes with magnets (neodymium or ordinary magnets with a large contact area with the surface) in offices, restaurants, workshops, as well as children’s rooms and kitchens.
Magnetic blackboard paint creates not only a functional usable surface, but also an interesting decorative effect with a matte finish. It is intended for indoor use on walls, wooden and wood-based surfaces, wallpapers, gypsum boards, etc.
EKOAKRYLKA MAGNETIC BLACKBOARD 2 in 1 PAINT is produced in black.
- Eco-friendly, acrylic, water-soluble product
- Good resistance to frequent wiping with a cloth or wet sponge
Preparation of the surface and the paint:
The surface should be cleaned from any dirt, dust, oily stains, peeling paint and loose parts of the surface. Gloss surfaces to be dulled. Uneven places and cracks to be smoothened and filled with an appropriate material. In the case of absorbent surfaces, impregnate with AKSILUX – absorbency leveling impregnation. Any microorganisms present on the surface (mould, algae) should be removed with the use of appropriate agents.
In case of applying onto old surfaces, perform a test painting. Only positive result allows determine the final use.
EKOAKRYLKA MAGNETIC BLACKBOARD 2 IN 1 PAINT should be thoroughly mixed before use.
The product is intended for use as shipped. Apply 3-4 coats with a paint brush or a roller (so as not to create a structure).
Next coat to be applied after at least 3 hours.
Painting should be performed at the temperature of 20 ± 5°C.
Use water for cleaning painting equipment.
Obtains full strength properties after 28 days from the end of painting.
It is best to use neodymium magnets or regular magnets with a large contact area with the surface.
Cleaning with a damp cloth or sponge may leave marks on the surface of the cloth or sponge.