AKSILBET VARNISH FOR CONCRETE WOOD

Preparation of the substrate:

Substrate to be painted should be dry, load-bearing, clean, without dust, greasy stains or other impurities affecting the adhesion of the product.

Preparation of the product:

The product is ready to use. Mix very thoroughly before application. For different production batches of a particular colour, combine in a larger container and mix thoroughly. Do not dilute.

Application:

Apply by brush or roller. We recommend application by brush, this gives the possibility to obtain characteristic streaks imitating natural stained wood. The product should be applied to a dry surface in a thin layer at an ambient temperature of +10°C to 25°C with a humidity of up to 70%. The substrate must be 3°C above the dew point temperature.

After applying the first coat, apply the next coat after the previous one has dried; the short drying time allows another coat to be applied after only 2 - 4 hours.

The final decorative effect depends on the method of application, the absorbency of the substrate and the number of coats applied.

Protect the freshly applied coating from rain and frost.

Use water to wash paint tools.