Application
Concrete floors painted with paint are resistant to abrasion and easier to keep clean. It is based on modern raw materials that guarantee the highest quality.
AKSILBET POSADZKA is intended for:
- painting of concrete floors indoors and outdoors
- painting of concrete floors in garages and basements, warehouses (except industrial floors, perfectly smooth)
- painting of concrete paving blocks and sidewalks
- painting of terraces
- and
- balconies
Gallery
Colors
Properties
- efficiency from 1 l of paint 7 m2 at one painting.
- It is recommended to apply at least two coats.
- coating is scratch, abrasion and impact
- resistant
- coating is chemically
- resistant
- coating is weather and UV resistant
- coating has excellent adhesion to concrete substrate
- coating is easily washable
- coating is
- resistant to wet scrubbing
- coating with light gloss.
Price list, certificates, approvals, downloadable materials
Technical data sheet AKSILBET POSADZKA leaflet
Expert advice
Substrate preparation:
The concrete floor to be painted should be seasoned, dry and clean. Permissible moisture content of the substrate 4%-humidity in most cases obtained after 28 days of concrete seasoning ( at 20°C).
Grease and oil stains are best removed by burning or washing with a suitable agent.
Mechanically trowelled concrete and smooth, compact surfaces should first be roughened to ensure good adhesion of the coating. This can be done by mechanical grinding. This improves adhesion and also removes dirt and cement polish.
When painting a concrete floor previously painted or impregnated, remove old paint coats, clean the floor of impregnation.
In the case of old concrete, loosely bonded concrete fragments should be removed and cavities should be filled. Then it is beneficial to sand the surface.
It is recommended to prime the surface with AKSILUX impregnate
In certain cases, EKO-DUR PODKLATE can be used.
Note: The product is designed for concrete surfaces. Do not apply to the surface obtained from self-levelling screeds intended for tiles, floor coverings.
Painting:
Mix the paint before painting. Apply 2-3 coats. The next coat should be applied after about 3 hours. The coating can be used after 24 hours, and vehicle traffic can take place after the coating is fully cured, i.e. 7 days. Apply the paint with a brush, roller or spray twice.
Use water to wash the painting tools.
All painting work should be carried out at an ambient temperature of not less than 150C, and preferably at 20 ± 50C. Permissible humidity of the air up to 70%. Do not use at high humidity. Protect the painted surfaces from rain
and frost.
Fast shipping