WOODLAK EXTERIOR wood varnish for the outdoors

WOODLAK ZEWNĘTRZNY is an acrylic, water-based varnish for wood and wood-based products used outdoors. The varnish is based on modern raw materials that do not contain harmful substances.

  Ask for product

Call us:(+48) 14 682 76 14

  Ask for product

Write to us aksil@aksil.pl

  Fast shipping

We deliver products up to 48h

Application

WELL-BUILDER intended for painting products made of wood and wood-based materials, in particular:

  • garden furniture
  • wooden garden architecture - arbours, pergolas
  • furniture
  • ornamental shutters, soffits, wooden and wood-based facade claddings
.

Galeria

Colours

In its basic version, theEVENTURE WOODLAK is a clear product. It is also available in pine, green, brown.

.

Properties

  • EVENTHAL WOODLAK produces varnish coatings with very good adhesion to the substrate, high hardness and, at the same time, high flexibility
  • creates coatings with high resistance to weather conditions
  • protects the wood against water and UV radiation
  • produced in semi-matt (gloss 33 degrees measured at 60 degrees) and gloss (gloss 80-85 degrees)
  • adapted to three application methods: paint for airless spray method (can also be painted with a brush), hydrodynamic spray and for dipping
.

Price list, approvals, downloads

Expert advice

Surface preparation:

Surfaces to be painted should be sanded with fine sandpaper and dusted off thoroughly. Wash resinified areas of wood substrates with extraction benzine.

Painting:

Mix WOODLAK EXTERNAL thoroughly before use. Apply WOODLAK EXTERNAL to the cleaned surface by dipping, brushing or, most preferably, spraying. It is recommended to apply two coats; after the first coat has dried, i.e. for about 1 hour, apply the second coat. Sand the coating lightly between coats. EKOAKRYLIK-PODKALK primer for sanding can be used as the first layer. The primer evens out the surface and sands very well.

Painted products should preferably be stored for about 2 days at room temperature before packing.

Water should be used to wash the painting tools.

Painting should be carried out at a temperature of at least 10°C, preferably at 20 ± 5°C.

.