Powered by Smartsupp

AKRYLKA KITCHEN & BATHROOM – interior latex white paint

AKRYLKA KITCHEN & BATHROOM is a high-quality, water-soluble latex paint creating layers of very good coverage and extremely high resistance, particularly to wet brushing with detergent. (14 times more resistant to scrubbing than requirements – class 1). Easy removal of stains and dirt from AKRYLKA KITCHEN & BATHROOM. Exceptional formula without any solvent content is characteristic of minimal level of odour and does not emit volatile organic compounds. Presence of silicone component increases resistance to moisture.


AKRYLKA KITCHEN & BATHROOM is designed for decor-protective painting of ceilings and wall made of lime plasters, lime-cement, lime plasters for interiors.
AKRYLKA KITCHEN & BATHROOM can be applied in residential and public use interiors (schools, nurseries, etc.)
Due to improved resistance to moisture and dirt of AKRYLKA KITCHEN & BATHROOM, we recommend it for corner-located rooms exposed to moisture: bathrooms, kitchen, laundries.


AKRYLKA KITCHEN & BATHROOM is sold only in white


AKRYLKA KITCHEN & BATHROOM is a suspension of pigments and fillers in water dispersion of resin and additive of supporting and enriching agents
AKRYLKA KITCHEN & BATHROOM provides a smooth, even coats
AKRYLKA KITCHEN & BATHROOM coat can adhere perfectly to a surface
Very good coverage is characteristic of AKRYLKA KITCHEN & BATHROOM
High resistance of the AKRYLKA KITCHEN & BATHROOM coat to wet brushing with a soft brush or a sponge -14 times higher level of resistance to brushing according to the PN-C-81914 standard
AKRYLKA KITCHEN & BATHROOM coat is vapour-permeable – breathable walls
Presence of silicone component increases coat resistance to moisture
AKRYLKA KITCHEN & BATHROOM is easy to clean, easy in use and provides comfort of work – no splashing during application
AKRYLKA KITCHEN & BATHROOM does not generate harmful fumes nor unpleasant odour during application and drying (Content of Volatile organic compound VOCs (LZO) = 0g/l)
AKRYLKA KITCHEN & BATHROOM can be coloured with available pigment pastes


AKRYLKA KITCHEN & BATHROOM Technical data sheet

See more

Expert advice

Surface preparation:
The surface designed to be painted must be clean, dry and free from grease. Remove any dirt and dust from the surface which could limit adherence properties of the paint. Any signs of contamination should be cleaned with water and detergent and left until dry. Moulded surfaces to be mechanically removed and apply adequate anti-mould agent. In case of highly water absorbing or dusty surfaces should be covered with priming paint beforehand, e.g. colourless AKSILUX impregnate or AKRYLKA GRUNT undercoat paint.

AKRYLKA KITCHEN & BATHROOM should be thoroughly mixed before use.
AKRYLKA KITCHEN & BATHROOM should be applied on dry and clean surfaces with the use of a brush paint or a roller (one or two layers – the second layer to be applied after 3-4 hours).
We recommend the ambient temperature not to be lower than +50C and not higher than + 300C, and relative humidity below 80%.
Use water for cleaning painting equipment.


Aksil Specialized Varnish Products Factory Ltd.