SIL-FAS silicone facade paint
  • SIL-FAS silicone facade paint

SIL-FAS silicone facade paint

307.50 zł
VAT included

SIL-FAS is a silicone water-based protective and decorative paint. It provides full protection against changing weather conditions and lichens: algae and fungi. It is based on modern raw materials that guarantee the highest quality.

Packaging:
Color:
Quantity

  Ask for product

Call us:(+48) 14 682 76 14

  Ask for product

Write to us aksil@aksil.pl

  Fast shipping

We deliver products up to 48h

Application

Water-soluble silicone facade paint SIL-FAS is designated for painting:

  • facades of residential, industrial, public and sacral buildings, both new ones and for renovation of the old ones
  • can be used for renovation of historical buildings
  • can be applied on cement, cement-lime, polymer-cement, acrylic plasters (lambda, linoleum, etc.) as well as on terrazzo surfaces
  • and on concrete, reinforced concrete and fibre-cement boards (strongly bonded).) as well as on terra cotta
  • can also be applied to concrete, reinforced concrete and fibre-cement board surfaces (firmly bonded)
.

Galeria

EKO-DUR Varnish for concrete floors - photo
EKO-DUR Varnish for concrete floors - photo
EKO-DUR Varnish for concrete floors - photo

Colours

SIL-FAS silicone facade paint - colour palette

Properties

Silicone facade paint SIL-FAS has excellent performance properties:

  • Very good coverage
  • Because of the silicone content, the coating is non-absorbent
  • The coating is protected against lichen: algae and fungi
  • Protects surfaces against carbonation and the damaging effects of water and frost.
  • Silicone paints form self-cleaning coatings that provide a fresh and clean façade effect for many years
  • A weather-resistant coating: acid rain, alkalis, exhaust fumes, UV radiation
  • Colour retains its colour fastness for many years
  • Vapour-permeable coating - ensures that the wall can fully u0022breatheu0022
  • Paint coating is washable - resistant to wet scrubbing
  • Walls are resistant to wiping
  • Paint has excellent adhesion to the substrate
  • Paint is available in 16 colours (works card) and 16 colours (factory card).hundred colours (worksheet) and coloured in accordance with RAL and NCS templates by agreement.

Facade paints are used to protect, consolidate and finish external walls, i.e. the façade of a building. For ecological reasons, water-based facade paints are becoming increasingly popular, as they do not pose a threat to the environment. A properly selected façade paint allows for a lasting protective effect and at the same time an attractive appearance of the building façade.

Facade paints are primarily the last finishing layer - thanks to the use of a high-quality product, we can obtain a durable coating. Facade paints also form a protective layer, protecting the building from the adverse effects of UV rays. The function of facade paint is also to protect the external walls against the penetration of moisture from the environment - this property is due to the low absorbency of this type of paint. The hydrophobic nature of façade paints also means that rainwater runs off the surface of the wall, washing away dust and other impurities. This does not mean, however, that it does not allow water vapour to pass through - its diffusion is ensured by the characteristic microporous structure.

Facade paints usually allow a matt or semi-matt finish to the walls of a building. Facade paints are also characterised by good covering power.

.

Downloadable material

SIL-FAS technical sheet

Expert advice

Preparing the substrate:

The substrate to be painted must be firmly bonded, clean, free from dust, grease and dry. A fresh substrate to be painted should be seasoned for the recommended period. Remove any organic contamination (lichen, mosses) mechanically and disinfect with a suitable preparation e.g. Fungicide. Wash dirty surfaces with water and detergent, e.g. COLORBRUK CLEANING PREPARATE.

For absorbent, loosely bound, loose and chalky substrates (leaving traces of dust when rubbed with the hand), impregnate with AKSILUX.

Preparation of the product:

Mix the paint thoroughly before use. Apply the paint with a brush, roller or by spraying. If necessary, for the first application the paint can be diluted with water in the ratio 3 parts paint : 1 part water. It is recommended to apply 2-3 coats. Apply the next coat after the previous one has dried out.

NOTE: Pour paints from different production batches of the same colour into a larger container and mix thoroughly.

Painting

Painting work should be carried out in good weather conditions (no fog, rain, snow). Protect the newly applied paint coat from precipitation condensation until it is completely dry. Carry out painting work at a substrate and ambient temperature of +50C to +300C and an air humidity not exceeding 80 %. Wash tools with water.

Productivity:

Productivity up to 8m2 from 1 litre with one application. Practical performance depends on many factors such as substrate type, texture, colour and the type of tool and application method used.