EKOAKRYLIK lacquer for children's furniture and toys

is an ecological, single-component, water-based product based on modern raw materials, does not emit harmful substances into the environment.

  Ask for product

Call us:(+48) 14 682 76 14

  Ask for product

Write to us aksil@aksil.pl

  Fast shipping

We deliver products up to 48h

Application

EKOAKRYLIK is intended for the protective and decorative painting of products made of wood and wood-based materials, e.g. furniture (with the exception of table tops), panelling and other indoor objects.

EKOAKRYLIK can be used for painting children's furniture and toys. The varnish complies with the requirements of the standard PN EN-71:3-Safety of toys.

EKOAKRYLIK can be used for the painting of racks and shelves in contact with food (pre-packaged).

EKOAKRYLIK has been approved by the PZH Food and Consumer Research Institute and can be used for the painting of children's toys and furniture, shelves and shop shelves in contact with food (pre-packaged).

EKOAKRYLIK is suitable for painting toys and children's furniture, shelves and shop shelves in contact with food (pre-packaged).

Properties

  • EKOAKRYLIK is a one-component, acrylic, water-based ecological product (does not emit harmful substances into the environment)
  • EKOAKRYLIK is characterised by very good adhesion to the substrate, high resistance to scrubbing and scratching
  • EKOAKRYLIK forms clear coatings
  • EKOAKRYLIK is characterised by resistance to water, alcohol, fats (liquid paraffin), coffee (for a coating seasoned for 7 days) and to the so-called u0022hot mugu0022
  • . u0022
  • EKOAKRYLIK is suitable for two application methods: varnish for the immersion method and varnish for the spray or brush method
  • EKOAKRYLIK can be produced in various degrees of gloss from matt to semi-gloss - the basic versions are semi-matt and semi-gloss
  • EKOAKRYLIK is best used together with a primer: EKOAKRYLIK-primer - the highest quality coatings are then obtained
.

Price list, approvals, downloads

Expert advice

Surface preparation:

Surfaces to be painted should be sanded with fine-grained sandpaper and dusted thoroughly. Wash resinified areas of wooden substrates with extraction benzine.

Painting:

Mix EKOARYLIK thoroughly before use. Apply EKOAKRYLIK to the cleaned surface by dipping, brushing or, most preferably, spraying. It is recommended to apply two coats; after the first coat has dried, i.e. for about

1 hour, apply the second coat. Lightly sand the coating between coats. It is possible to use EKOAKRYLIK-POUNDER as the first layer. The primer evens out the surface and sands very well.

Painted products should preferably be seasoned for about 2 days at room temperature before packing.

Water should be used to wash the painting tools.

Painting should be carried out at a temperature of at least 10°C, preferably at 20 ± 5°C.

.