1) The surface should be washed with detergent water, under pressure, rinsed with clean water and dried.
2.If the surface is smooth it should be roughened.
(3) Mouldy, moss- and/or algae-infested areas should be mechanically cleaned and disinfected.
The substrate can be impregnated with a protective impregnator such as AKSILUX.
2. how to paint concrete fences?1) The surface of the fence should be prepared according to the instructions in point 1.
2) The fence should be repainted twice with AKSILBET paint. The first time AKSILBET paint should be diluted with water in the ratio of 3 parts of paint to 1 part of water, the second repainting should be done with undiluted paint.
(3) The paint can be applied by brush, roller or spray. For spray painting, we recommend the following parameters:
- nozzle diameter 0.013-0.019 inches, for example, nozzle 513
- spray pressure about 175-200 bar
- spray angle 20 - 50 degrees
3 How to paint a new concrete tile?1) Apply AKSILBET DACHÓWKA paint by spraying method, on wet or hardened roof tiles.
2) Wet tiles should be painted under high pressure (about 8 atm).
(3) After the tile is cured and seasoned, it should be painted a second time.
4. the thickness of the coating should be 35 - 40 µm.
4. how should old concrete tile be painted?1) Tiles should be thoroughly cleaned with water and detergent using a pressure washer (recommended) or brush, then rinse with clean water and dry thoroughly.
2) After the substrate is dry, rub AKSILUX impregnant into it.
3.After the tile has cured and dried, it should be painted a second time.
4.After the impregnant has dried, paint twice with AKSILBET DACHÓWKA paint.
(5) During the first painting, the paint should be diluted with water in the ratio of 3 6. parts of paint to 1 part of water.
The second painting should be done with undiluted paint.
5. how should eternit be protected?1) Cleaning and painting of eternit should only be carried out by contractors due to the dusting of asbestos.
2) If the eternit is old ("loose") before painting, the substrate should be strengthened with AXILUX impregnant.
3.Eternit should be thoroughly cleaned with water and detergent using a pressure washer (recommended) or brush, then rinse with clean water and dry thoroughly. During work, follow the instructions contained in the decree of the Ministry of Labour and Social Policy dated 02.04.1998 (personal protective equipment of the worker).
4.After the impregnant has dried, paint twice with AKSILBET DACHÓWKA paint.
(5) For the first painting, the paint should be diluted with water in the ratio of 3 parts paint to 1 part water.
6.The second painting should be done with undiluted paint.
6. how to paint the roofing sheet correctly?1) Clean the sheet mechanically from rust and then wash with water and detergent, extraction gasoline, Emulsion RN-1 or water with ammonia (25% ammonia should be diluted with water in the ratio of 0.5 l of ammonia per 10 l of water).
(2) If the sheet was previously painted with paint, remove the remains of the peeling coating with paint strippers, or with a wire brush and spatula. Slightly corroded areas should be sanded and dusted off. Old coating clinging to sheet metal should be degreased with water and detergent or extraction gasoline, matted and dusted off thoroughly.
(3) Mix the paint thoroughly before use.
4.The coating should be painted twice with AKSIKOR paint by brush, roller or spray.
5) Do not paint during fog or rain.
6.Tools after painting with AKSIKOR should be washed with water.
7. How to properly protect sandstone and make it shine?1.To prepare the surface well for painting, clean it with a pressure washer using water and detergent.
2.If the surface is infected with algae or fungus, it should be removed with means designed for this purpose.
3) Wait for the washed substrate to dry before painting with PIASKOWIECLUX impregnate.
4) Depending on the desired final effect, apply 1, 2 or 3 layers of PIASKOWIECLUX impregnate.
5.Sandstone that has a tendency to crumble should be painted at least twice.
6.In order to give the surface a light shine, the sandstone should be painted at least 3 times.
7. sandstone impregnate can be applied either by roller, brush or spray.
8) Individual layers of impregnate should be applied at intervals of at least one hour.